Skip to main content

Secret (ussd) Codes For Android Mobile Phones


1. Complete Information About your Phone

*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. 

Usage statistics

2. Factory data reset
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled application
SD card files e.g. photos, music files, etc.
Note: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.

3. Format Android Phone

*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
Note: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.

4. Phone Camera Update

*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.

5. End Call/Power

*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, AirPlane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.

6. File Copy for Creating Backup

*#*#273283*255*663282*#*#*

This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.

7. Service Mode

*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.

8. WLAN, GPS and Bluetooth Test Codes:

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)

*#*#232338#*#* - Shows WiFi MAC address

*#*#1472365#*#* - GPS test

*#*#1575#*#* - Another GPS test

*#*#232331#*#* - Bluetooth test

*#*#232337#*# - Shows Bluetooth device address

9. Codes to get Firmware version information:

*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number

10. Codes to launch various Factory Tests:

*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - Touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version

11. Application related codes:

*#*#8255#*#*   Google Talk information 
*#07#          Maximum SAR
*#06#          IMEI Number of the phone


Labels:

Comments

Post a Comment

Popular posts from this blog

NSG 2.1 Tcl/OTcl Script Generator

Are you a beginner for ns2 network simulator? Are you afraid of Tcl/oTcl script generation? Then there is a tcl script generator, named NSG 2.1 NSG - Network Simulation Generator NSG 2.1 is a java .jar file.  So, this application can run on all platforms (windows/linux/mac os). It deserves the java installed in you pc, prior to working with NSG 2.1. Java must be installed to run NSG2.1. So, initially, java must be installed. How to install java in Windows/ubuntu/mint/debian linux/ OS X ? Step 1 : Go to Terminal and run  java -version   to check the java version installed in your machine. Step 2 :  For Windows, click here  to download the java installer. Then, it is a typical next-next windows executable installation. For ubuntu/mint/debian linux operating systems, run the following commands in that terminal: sudo apt-get install default-jre sudo apt-get install default-jdk sudo apt-get install openjdk-7-jre sudo apt-get install openjdk-7- jdk How to
Post a Comment
Read more

SUMO installation in linux (Debian/Ubuntu/Mint)

SUMO - S imulation of U rban Mo bility SUMO an open source, portal, microscopic, multi-modal road traffic simulation. It allows for intermodal simulation including pedestrians and comes with a large set of tools for scenario creation.  It allows to simulate as to how a given traffic demand which consists of single vehicles moves through a given road network. The simulator allows to address a large set of traffic management topics. It is purely microscopic: each vehicle is modeled explicitly, has an own route, and moves individually through the network. SUMO Installation Procedure: Installation in Linux and mac OS Step I: Install two pre-requisite packages to build SUMO with GUI. Go to terminal and run: $ sudo apt-get install libgdal1-dev proj libxerces-c2-dev $ sudo apt-get install libfox-1.6-dev libgl1-mesa-dev libglu1-mesa-dev Step II: If you are using Unbuntu 12.04 or older versions, as it doesn't ship with libgdal package, create a symbolic link: $ sudo ln -s /usr/lib/li
1 comment
Read more

getattrib, Setattrib, hasattrib and delattrib in python

# `getattr(object, name[, default])` Function in Python The `getattr(object, name[, default])` function returns the value of a named attribute of an object, where `name` must be a string. If the object has an attribute with the specified `name`, then the value of that attribute is returned. On the other hand, if the object does not have an attribute with `name`, then the value of `default` is returned, or `AttributeError` is raised if `default` is not provided. ```python >>> t = ('This', 'is', 'a', 'tuple') >>> t.index('is') 1 >>> getattr(t, 'index') <built-in method index of tuple object at 0x10c15e680> >>> getattr(t, 'index')('is') 1 ``` when the attribute is not defined, ```python >>> getattr(t, 'len') Traceback (most recent call last): File "<stdin>", line 1, in <module> AttributeError: 'tuple' object has no attribute 'len
Post a Comment
Read more